Special Tools

Alfa Romeo supplied a huge range of special tools to their dealer network to perform the various service and maintenance jobs on the cars with the appropriate tools. For the customer it was not possible to purchase special tools from Alfa Romeo. However most of the special tools are not really necessary because a well assorted toolbox is sufficient enough for nearly all jobs.

Nevertheless there are some special tools which ease a job tremendously or make a potentially dangerous job safe. I made blueprints of the tools I used over the years and thought it might be a good idea to make them accessible for you as well.

If you have blueprints for other special tools I would like to ask you for a copy which I will post here so that others can participate as well.

Additionally I had a look through the Alfa Romeo Special Tools Catalogue: On over 200 pages all special tools are shown in drawings of each tool in use. The drawings might be useful because they can give you an idea of how a special tool could be made up if necessary. The drawings of the tools I deemed useful are shown below.

To download:

All you need is the Adobe Acrobat Reader. The Acrobat Reader is a tool that allows to read and print the files you download. It is platform independent so it doesn't matter if you use a Windows PC or a Macintosh PC.If you don't have the software just mentioned click on the link to download the software first.

Click on one of the small pictures below to download the associated file.

Blueprints:

	Puller/Driver for rear transmission bush (transmission can remain in car): File format: PDF File size: 36.649 bytes
	Driver for valve guides: Covers both drivers for inlet and exhaust valve. File format: PDF File size: 21.178 bytes
	Tool for centering the clutch plate: File format: PDF File size: 21.223 bytes
Sorry, blueprint still under construction Please check again later.	Tool for removing and refitting front suspension springs: File format: PDF File size:  bytes

Drawings out of the Alfa Romeo Special Tools Catalog:

Please note: Clicking on one of the small pictures below will only download a larger picture not a blueprint to rebuild the tool.

	Engine: Puller for valve guides File format: PDF File size: 16.404 bytes
	Engine: Tool for retaining innerliners File format: PDF File size: 23.629 bytes
	Engine: Wrench for turning camshaft File format: PDF File size: 25.227 bytes
	Engine: Tool for locking the flywheel File format: PDF File size: 23.492 bytes
	Rear Suspension: Puller/Driver for trailing arm bushes File format: PDF File size: 19.133 bytes
	Rear Suspension: Puller for reaction trunnion bushes File format: PDF File size: 16.464 bytes
	Rear Suspension: Driver for reaction trunnion bushes File format: PDF File size: 15.566 bytes